• Applications
  • Wood Based Products In-plane and Glue-line Shear Tests | ASTM D1037 | Equipment

Wood Based Products In-plane and Glue-line Shear Tests | ASTM D1037 | Equipment

0 1
Wood Based Products In-plane and Glue-line Shear Tests | ASTM D1037 | Equipment

Shear loads in wood beams are typically largest at beam supports and adhesive joints are a common location of wood failure. In-plane shear tests help to determine the strength of bulk wood products and supplement tensile tests in characterizing the bond strength between wood fibers or particles and resin binder. Glue-line shear tests are useful to determine adhesive strength and bonding strength between the adhesive and wood product. ASTM D1037 provides in-plane and glue-line shear test methods for wood based products. Both tests are conducted with block specimens using the same test fixture. Alignment of the shear plane and loading within the test fixture is achieved by a cutout in the in-plane shear specimen and by vertically offsetting the panels in the glue-line shear specimen. The shear stress is then applied by compression loading. The design of the wood specimens, with a cutout or offset, helps to ensure than the specimen fails in the wood material for in-plane shear or at the glued interface for glue-line shear. Reference ASTM Standard D 1037, 2012, Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials, ASTM International, West Conshohocken, PA, 2012. The specific properties of the wood product and adhesive glue being used will determine the need for a low or medium force capacity and tabletop or floor standing test machine.