Tappi

26 results - showing 1 - 12
1 2 3
The Edge Compression Test method or ECT describes procedures for determining the edgewise compressive strength, parallel to the flutes, of a short ...
Standard
  • TAPPI T 839
This method is designed to measure the maximum bursting strength of paper and paper products having a bursting strength of 50 kPa up to 1200 kPa (7...
Standard
  • tappi t 403
This method describes a procedure for measuring the bursting strength of single wall and double wall corrugated and solid fiberboard within the ran...
Standard
  • tappi t 810
This method describes procedures for determining the edgewise compressive strength (ECT), parallel to the flutes, of a short column of single-, dou...
Standard
  • TAPPI T 811
The TAPPI Elmendorf testing method T414 measures the tearing resistance of paper perpendicular to the plane of the paper specimen, and the tearing ...
Standard
  • tappi t 414
Fundamental behavior of paper in tensile loading in key to understanding the quality of paper. The stress strain plot of paper is a model of the st...
Standard
  • tappi t 494
This method is used to measure the force required to separate corrugated board between the flute tips of corrugated medium and its linerboard facin...
Standard
  • TAPPI T 821
The flat crush test (1) is a measure of the resistance of the flutes in corrugated board to a crushing force applied perpendicular to the surface o...
Standard
  • tappi t 825
Tensile strength of paper can be quantified with the use of a stress- strain graph. TAPPI T-404 test is a standard test method to measure the stres...
Standard
  • tappi t 404
This method describes a procedure for determining the compressive resistance of containerboard. This method is intended for containerboard having a...
Standard
  • tappi t 826
Measures the energy required to puncture container board or corrugated board with a pyramidal point affixed to a pendulum arm. These energy units a...
Standard
  • tappi t 803
The ring crush test correlates with edgewise compression strength of paperboard(1). This method is intended for paperboard between 0.28 mm (0.01 in...
Standard
  • TAPPI T 822
26 results - showing 1 - 12
1 2 3

Need Help?

Talk to one of our Application Engineers to help you find the right solution for your test applications

Contact Us Now