ISO 2411 specifies the standard test method for testing the adhesion of rubber or plastics coated fabrics to metal, concrete and synthetic surfaces.
If you plan on conducting ISO 2411 we recommend acquiring the test standard from ISO. There are many important details regarding this test method that are provided which are key to achieving successful results. Every standard provides important environmental conditions, test sample preparation and conditioning requirements, sample dimensions and test reporting expectations. It’s critical that you fully understand the standard so that you can set up the test, run the procedure, and report the results requirements.
What Is ISO 2411?
ISO 2411 standard test method describes a test to measure adhesion properties of rubber and plastic coated fabrics. Each test sample is pulled at a constant rate of extension until it breaks.
What Other Standards Apply to Tests of Coated Fabrics?
- ASTM D751-6 breaking strength grab and strip tests for coated fabrics
- ISO 1421 coating adhesion of rubber or plastics-coated fabrics
Why Perform Adhesion Tests on Coated Fabrics?
Adhesion tests are needed to ensure the quality of rubber-coated fabrics including tarpaulins, rainwear, outdoor clothing, and similar products. Understanding the basics of adhesion testing helps textile fabricators and development engineers determine which fabrics to use in their end applications. Adhesion testing delivers important results depending on the application of the fabric. For instance, good material bonds are especially important in composite applications where the fabric is going to be continuously flexed, folded, or exposed to high winds. Of course, it is important to compare results with other fabrics to determine the appropriate level of adhesion for given applications.
Test Machines for Coated Fabrics
Our universal test machines serve multiple plastic testing applications and are capable of performing all quasi static tension/compression tests, such as tensile, peel, adhesion, and flexural testing. Machine selection is best based on the number and type of tests anticipated in the future. The vast majority of fabric tests can be performed at loads below 5 kN (1125 lbs). Virtually all fabric tests require a uniform constant rate of extension (CRE), or constant velocity control mode with the vast majority occurring between 1 to 500 mm/min (0.04 to 20 in/min). Measurement of force complies with ISO 7500-1. ISO 2411 test speed is 100 mm/min (4 in/min).
ISO 2411 Test Systems→
What Test Fixtures Are Recommended for ISO 2411?
Mechanical Action Grips are affordable solutions featuring a wide variety of interchangeable jaws and accessories. Most mechanical grips feature a side opening vise design with smooth, serrated, and corrugated (wave) surface jaws.
Consider grip models G227 and G240K with serrated jaws and a handheld roller. Our 2 kg GTQC803A handheld roller is ideal for sample preparation.
ISO 2411 Test Specimens
Each sample is 50 mm (1.9 in) wide with a minimum length of 200 mm (7.8 in) and a resulting separation between the test grips of 75 mm (2.9 in) when mounted in the test machine.
Articles Related to ISO 2411 Plastic Testing
ISO 2411 Testers
100 Family Electromechanical Universal Test Machine
Most Economical
The 100 family is the most economical solution but it offers less functionality and flexibility then other systems. The load frame is compact and lightweight which is great if lab table space is limited. Complete system includes controller software, load frame, actuator and grips specifically configured for your biomedical test.
240 Family Electromechanical Universal Test Machine
Best Performance
The 240 family is the ideal solution for a wide range of tests and features higher travel and faster speeds compared to traditional universal test machines. The load frame is compact and lightweight which is great if space is limited. Complete system includes controller software, load frame and grips specifically configured for your test requirements.
ISO 2411 Grips
ISO 2411 Sample Preperation Aids
ISO 2411 Software

ISO 2411 Test Machine Controller Software | NISO2411
Application specific module features preset settings, test calculations, and graphical test report contents.

Video Extensometer | TestVE
Captures and records the test. Video playback synchronized with the force-time curve, permitting a later viewing of the test.