ASTM C 293 (C-293) determines the flexural strength of concrete specimens by the use of a simple beam with center-point loading. This test method is used to determine the...

ASTM A-1003 covers coated steel sheet used in the manufacture of cold-formed framing members, such as, but not limited to, studs, joists, purlins, girts, and track. The steel sheet used...

ASTM A1022 covers deformed and plate stainless steel wire and welded wire for concrete reinforcement. The mechanical properties that are to be determined for this test standard include; tensile...

ASTM A1061 is for testing multi-wire steel strand. The mechanical properties of the test specimen are determined by a test in which fracture occurs in the test specimen between...

ASTM A-1064 or A 1064 covers steel wire and welded wire reinforcement produced from hot-rolled rod to be used for the reinforcement of concrete. According to ASTM, this standard is...

ASTM A 1034 (A-1034) test methods cover the testing of mechanical splices for reinforcing bars. Steel bar in concrete has different mechanical behavior than bar-splice in testing without concrete. ...

ASTM A-131 or A 131 covers structural steel plates, shapes, bars, and rivets intended primarily for use in ship construction. Mechanical properties such as elongation and toughness shall be evaluated...

ASTM A139 covers arc-welded steel pipe. Five grades of arc welded pipe, including NPS 4 and over, are covered by this standard. The welded steel pipe must undergo...

Steel welded wire reinforcement of concrete is tested through the standards covered by ASTM A185. Welded wire used in the reinforcement of concrete includes; welded wire fabric, WWF, fabric,...

ASTM A193 covers alloy-steel and stainless steel bolting for high temperature of high pressure service and other special purpose applications. Specifically, this test is used for steel and stainless...

ASTM A 36 covers carbon structural steel. Structural steel is considered to be steel shapes, plates, and bars. Use of steel bars includes use in riveted, bolted, or...

ASTM A-370 or A 370 covers procedures for the mechanical testing of steels, stainless steels, and related alloys to determine the properties required in the product specifications. The mechanical tests...

This ASTM testing standard is specifically oriented to Grade 80 alloy steel chain for applications that might include; slings, lifting assemblies, and load binding. ASTM requires alloy steel chain...

ASTM A 413 is a thorough testing procedure for carbon steel chains. This test is specifically aimed at testing steel carbon chain used in railroad cars, construction, industrial uses,...

ASTM A416 is a standard specification that covers requirements of uncoated steel seven-wire that is used in pre-tensioned concrete. ASTM specifies that low relaxation and normal-relaxation stands meet...

ASTM A453 is for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels. This ASTM specification covers the standard requirements for bolting material used in high temperatures fastener...

ASTM A466 covers weldless chain. Weldless chain is typically used in applications that require light and flexible chain. The chain materials included in this test are steel, brass,...

This ASTM specification covers testing for welded carbon steel machine chain, and coil chain. The two classes of steel machine chain and steel coil chain covered in this test,...

ASTM A48 covers the standard specification for gray iron castings. Iron castings tested with this ASTM practice are typically used in general engineering situations involving tensile forces. The...

ASTM A487 covers steel castings and sis uitable for pressure services. Specifically, this standard covers the steel alloys and martensitic stainless steels types that are suitable for pressure vessels....

ASTM A-496 or A 496 is a standard test procedure for undergoing tension strength test, and bending strength test on steel wire. Specifically, the steel wire in this test...

This ASTM is used to test welded wire that is used in the reinforcement of concrete. This standard coves wire that is made from cold-worked drawn or rolled deformed...

ASTM A517 covers the standard specification for pressure vessel plate alloy steel, high-strength, quenched and tempered. Steel tested with the practices of A517 are often used in fusion welded...

ASTM A529 covers the standard specification for high-strength carbon-manganese steel of structural steel. Structural steel is defined by ASTM to be shapes, plates, and bars that are to be...

ASTM A-6 or A 6 covers a group of common requirements that apply to rolled structural steel bars, plates, shapes, and sheet piling. Tension testing and chemical analysis shall...