The E3543 features gauge lengths from 2 inches (50 mm) to more than 10 inches (250 mm), with measuring ranges to 4 inches (100 mm). It may be left on...

Useful in environmental chambers where the entire extensometer must be exposed to elavated temperatures. The model 3555 is ideal for many tests: Composites, metals and high temperature...

Hydraulic Vice grips combine easy specimen loading and clamping and are applied to samples requiring high force capacity.

Hydraulic Vice grips combine easy specimen loading and clamping and are applied to samples requiring high force capacity.

Hydraulic Vice grips combine easy specimen loading and clamping and are applied to samples requiring high force capacity.

Fracture mechanics clevis grips serve static and dynamic testing of compact tension specimens for fatigue crack growth tests and fracture toughness tests such as KIc, JIc and CTOD.

GB5-250 series high temperature fracture mechanics clevis grips are designed for use inside elevated temperature furnaces and are capable of both static and fatigue crack growth tests using compact tension...

All ASTM dies are made from A-6 tool steel which is chip resistant and highly abrasion resistant. We heat treat to proper hardness to meet your needs. Dies are EDM...

Specifically for performing tests in accordance with ASTM D5656 - Thick-Adhered Metal Lap-Shear Joints where Stress-Strain deformation is measured in the opposite sides of the test specimen and the...

G113-C297 are designed to meet the requirements of ASTM C297; tensile testing of sandwich core materials. The test fixtures are self aligning. The test material is bonded to the...

G113-D1623B meets ASTM D1623 test method

Drum Peel Test ASTM D1781 specifies test fixtures for determining the adhesive properties between a relatively flexible adherand and a stiff adherand. The G115-D1781 fixture meets these requirements. The...

Index Puncture Resistance Test fixture for determining the index puncture resistance for geomembranes and similar materials - G145-D4833. The testing fixture consists of two components, a ring clamp attachment, and...

Tensile Test Device Requirements

G175-C1358 is designed to be used to determine compressive strength of ceramic materials, as specified by ASTM C1358. ASTM allows for many grips to be used with the test practices...

Shear Test Device Requirements

G22-C947 is used to determine bending strength of thin glass-fiber-reinforced concrete, as specified by ASTM C947. ASTM C947 requires the loading surface for this test to be cylindrical. This...

G290-A497 requires a lower grip to pull the wire, and universal swivel adapter (see GA327). The fixture transmits the load in a way to mimic the load conditions that the...

G353-D2095 fixtures meets ASTM D2095 requirements for tensile strength tests of adhesives involving bar and rod sample geometries. G353 grips feature universal self aligning capabilities involving holding the specimen between...

G474-C203 fixtures enable tensile testing of chemical resistant mortar, grouts, and monolithic surfacing. The test fixture for this ASTM standard is meant to be used with a specific shape test...

Meets ASTM D143 Tensile Testing Perpendicular to the Wood Grain G474-D143 meets ASTM D143 tensile testing perpendicular to the wood grain test requirements which describes the size and...

ASTM D2861 specifies test fixtures for determining the peel strength of materials made of copper foil and dielectric film or treated fabrics. The G50-D2861 fixture meets these requirements. Flexible composites...

Meets ASTM C633 for Bond Strength Testing of Thermal Spray This grip is specifically designed to be used to determine the bond strength of thermal spray, as specified by...

COF Test Device Requirements

G689-C133 performs three point rupture tests of refractories, as specified by ASTM C133. ASTM requires a test fixture with a curved surface to apply the load along the centerline...