• Print
Extensometer Special Extensometers Clip On Miniature Transverse Diametral Extensometers | E3475
 

Clip On Miniature Transverse Diametral Extensometers | E3475 Clip On Miniature Transverse Diametral Extensometers | E3475

Clip On Miniature Transverse Diametral Extensometers | E3475
OVERVIEW
A miniature extensometer for transverse or diametral strain measurements on small or thin specimens - for Poissons ratio when used with an axial extensometer.

Used for measuring transverse or diametral strain and can be used simultaneously with an axial extensometer to determine Poissons ratio.

Call or inquire online today!

Product Features

  • Self-supporting on the specimen.
  • May be left on through specimen failure.
  • All models will measure both positive and negative desplacements.
  • These very lightweight extensometers are self-supporting on the test sample.
  • Full bridge, 350 ohm gaged design for compatibility with nearly any test system.
  • All standard units meet existing ASTM class B-1 and ISO 9513, class 0,5 requirements for accuracy
    		•


    Product Specification

    Model # E3475
    Temperature Rating Standard (-ST) is -40 C to +100 C (-40 F to 210 F)
    Sample Form Type Works with samples up to 1 inch (25 mm) width or diameter
    Cable Ultra-flexible cable, 8 ft (2.5 m) standard
    Output 2 to 4 m V/V, nominal depending on model
    Linearity 0.15% to 0.20% of full scale measuring range, depending on model
    Excitation 5 to 10 VDC recommended, 12 VDC or VAC max
    Ordering Information

    E3475 Available Versions: ANY combination of measuring range and temperature range listed below is available.




    Image Gallery

    Clip On Miniature Transverse Diametral Extensometers | E3475