• Print
Extensometer High Temperature Extensometers High Temperature Axial Extensometer - Furnace Mounted| E3548
 

High Temperature Axial Extensometer - Furnace Mounted| E3548 High Temperature Axial Extensometer - Furnace Mounted| E3548

High Temperature Axial Extensometer - Furnace Mounted| E3548
OVERVIEW
The E3548 features is ideal for use with split furnaces similar to our F1016 series. The units are mounted on the furnace mounting brackets. These extensometers mount on a water-cooled bracket mounted on the furnace side cut-out or with other support brackets.

Call or inquire online today!

Product Features

  • Tests metals, ceramics, and composites at high temperatures.
  • The units are mounted on the furnace mounting brackets.
  • Innovative side mount allows the extensometer to engage the specimen once the test temperature has been achieved.
  • Rods are made to order to the length required for your furnace. Mounting brackets may be integrated with the furnace cut-out.
  • All models can measure in both tension and compression and can be used for cyclic testing.
  • Full bridge, 350 ohm strain gaged design for compatibility with nearly any test system.
    		•


    Product Specification

    Model # E3548
    Force Less than 30 g typical
    Temperature Rating Standard (-ST) is to 1200 C (2200 F), optional (-HT) 1600 C (2900 F)
    Length 10 to 50 mm (and 0.5 to 2 in)
    Cable Integral, ultra-flexible cable, 8ft (2.5) standard
    Output 2 to 4 mV/V nominal, depending on model
    Linearity Less than 0.15% of full scale measuring range
    Excitation 5 to 10 VDC recommended, 12 VDC or VAC max.
    Ordering Information

    E3548 Available Versions: Any combination of gage length, measuring range and temperature range listed below is available, except as noted. Ceramic rod lengths are made to fit furnaces as required.




    Image Gallery

    High Temperature Axial Extensometer - Furnace Mounted| E3548
    High Temperature Axial Extensometer - Furnace Mounted| E3548