• Print
Extensometer Deflectometers & COD Displacement Gauges Clip On Displacement COD Gage | E3541
 

Clip On Displacement COD Gage | E3541 Clip On Displacement COD Gage | E3541

Clip On Displacement COD Gage | E3541
OVERVIEW
For fracture mechanics studies. Gages are in comliance with standardized test methods, such as ASTM E 1820 for determination of fracture toughness properties of metallic materials.

Clip-on gages are used for a variety of fracture mechanics tests, including compact tension, arc shaped, disk shaped, bend speimens and other standards organization's test methods.

Call or inquire online today!

Product Features

  • All capable of high frequency operaton (50 Hz or faster, depending on version).
  • Sharp grooves per ASTM E 1820, E813, and E300 for improved stability when mounted.
  • All standard units meet existing ASTM requirements for accuracy.
  • Fully enclosed gages to protect from accidental damage.
  • Full bridge, 350 ohm strain gaged design for compatibility with nearly any test system.
    		•


    Product Specification

    Model # E3541
    Force Exerts 2 to 3 lbs (9 to 14 N), depending on model
    Temperature Rating Standard (-ST) is -40 C to +100 C (-40 F to 210 F)
    Sample Form Type Wide range of specimen sizes available, including AX, BX, NX and larger, to 8 inches (and 200 mm) diameters standard (larger sizes on special order)
    Length 3 to 20 mm (and 0.1 to 0.5 in)
    Cable Ultra-flexible cable, 8 ft (2.5 m) standard
    Output 2 to 4 m V/V, nominal depending on model
    Linearity 0.15% for measuring ranges less than 0.25 inch (6 mm), 0.20% for greater measuring ranges
    Excitation 5 to 10 VDC recommended, 12 VDC or VAC max
    Ordering Information

    E3541 Available Versions: The following combinations of gauge length and measuring ranges listed below are available as standard, except as noted. All are available in any temperature range listed.




    Image Gallery

    Clip On Displacement COD Gage | E3541
    Clip On Displacement COD Gage | E3541