Material Testing Systems
Structural and Component Test Systems
Accessories
Support
Extensometer
Clip On Axial Extensometers
Clip On Miniature Axial Extensometers | E3442
Clip On Miniature Axial Extensometers | E3442
OVERVIEW
Miniature general purpose clip on extensometers for axial tensile, compression, and cyclic testing. Gauge lengths from 0.12 - 0.64 inches (3 - 12 mm) and measuring ranges from 5% to 100% strain. Very small and rugged, yet ultra-light weight, these units are widely used for testing small and delicate samples, including biomedical samples, wire and thin sheet materials. Also used for low cycle fatigue testing where short samples are used.
Note: Optional connectors available to match your test machine.
Product Features
|
|
Product Specification
| Model # | E3442 | |
| Force | 10 to 20 g typical | |
| Temperature Rating | Standard (-ST) is -40 C to +100 C (-40 F to 210 F) | |
| Length | 3 to 12 mm (and 0.250 to 0.640 in) | |
| Cable | Integral, ultra-flexible cable, 8ft (2.5 m) standard | |
| Output | 2 to 4 mV/V nominal, depending on model | |
| Linearity | 0.10% to 0.15 % of full scale measuring range depending on model | |
| Excitation | 5 to 10VDC recommended, 12 VDC or VAC max |
Ordering Information
E3442 Available Versions: ANY combination of gage length, measuring range and temperature range listed below is avialable, except noted. Available in intermediate and larger gage lengths on special order.
E3442 Available Versions: ANY combination of gage length, measuring range and temperature range listed below is avialable, except noted. Available in intermediate and larger gage lengths on special order.








